Mobility Parts and Service is the new supplier of Rascal parts for scooters and power wheelchairs that were manufactured by Electric Mobility Corporation. All of the Rascal spare parts inventory, customer lists, and customer service telephone numbers were then acquired by our new company, Mobility Parts and Service.
We understand. Call us anytime from am to pm EST at , or just enter your question and give us a number to call you back at right here. Mobility Parts and Service is a trusted online store for all your mobility scooter needs. We offer payment via all major credit cards as well as through Paypal. To order by check or if you have any questions please call us from 9am to 5pm Eastern time Monday-Friday at This product was added to our catalog on Monday 23 July, Home Sign In 0 item s Checkout.
Welcome to our Store! Pull Dash Release up and lift dash to upright position to engage wheel locks onto front wheels. Position yourself on the right side of the AutoGo Press the foot lever, as shown in Illustration 8, to retract the frame lock. Page 31 Make sure the main frame is above the pivot lock and you are ready to automatically power fold the vehicle.
Pull the right side Engager lever to activate drive motor and initiate fold. The AutoGo will automatically fold under its own power and stop. Page Illustration 9 - Folding Operation 6. When fully folded, latch the frame and tiller together by pressing the tiller back against the main frame.
When folded, lower the dash to release the front wheel locks. When moving vehicle in power folded position, use extreme care to avoid tripping or colliding with yourself, others, or other vehicles. Unfolding Information Follow these instructions and refer back to illustrations to unfold the vehicle using the power unfold feature When folded flat, the AutoGo can be easily stored in a car trunk, under your bed, or in a storage compartment.
Instructions to take your AutoGo apart and put it back together are presented in this section. Lift Battery Pack handle up and pull forward to remove Battery Pack from tiller, as shown in Illustration Flatten seat frame as shown in Illustration 14, by: — Rotating seat Frame Cams by pushing cam handles down until they lock, — Lifting the rear of seat frame up, 5. Pull Rear Frame back and lift crossover strap up until seat frame collapses to the rear.
Page Re-Assembling The Autogo Lift rear of folding chassis to remove drivetrain. Plug drivetrain into connection of frame. Pull seat frame up into position, making sure crossover bar seats onto folding chassis. Seat Frame Cams will rotate up to lock in position. Page Transporting The Autogo 24 hours prior to departure through your travel agent or in person. Ask your airline or your travel agent whether they will need to disassemble the AutoGo or whether they plan to load and store it on the plane without disassembly.
Page 42 By Bus, Van or Truck without Disassembly — If transporting your AutoGo fully assembled in a van, bus, or truck, secure it to the floor of the vehicle using a four point tie-down system. Page Maintenance Your AutoGo requires only minimal maintenance and by setting time aside each month for careful inspection and checking items included in this section, you can be assured of a long, useful life of your AutoGo vehicle.
Preventative Maintenance Performing periodic preventative maintenance on your AutoGo will ensure long, useful operational life as well as identifying any potential problems that may occur that might effect safe use and operation of the vehicle.
Page Headlight Note: Headlight is a 24V 5W unit and is generally not available at local supply stores. Lubrication Under normal operating conditions, the AutoGo requires no special lubrication or grease. The drivetrain gearbox is a sealed unit. Bearings, joints, fasteners and other moving parts are protected by self-lubricating components so periodic lubrication is generally not necessary. Page Tires Tires Front and rear tires of the AutoGo are foam-filled and do not require air pressure.
Tires should, however be checked periodically for damage, cuts, flat- spots, or excessive tread wear. Damaged tires should be replaced. This can be done by using a non-abrasive auto polishing material available at your local automotive parts dealer or local department store automotive section. A small, open-ended hex wrench can be used on the turnbuckle. Drivetrain The parking brake of the drivetrain includes an adjustment setscrew for the brake pad.
Battery location is shown in Illustration Remove clock from the dash by gently prying the edge of the clock from the dash. Use a small screwdriver to open the case by inserting the screwdriver blade into the notch on the back cover. If you are unable to get your vehicle operating, call either Electric Mobility Customer Service toll free number located at the front of this manual or your local Authorized Service Center.
Cold weather reduces battery life 3. Allow batteries to reach room temperature and then fully recharge 4. Defective charger 4. Page Controller Fault Codes Controller Fault Codes In addition to the troubleshooting information in the previous section, the controller used in the AutoGo provides diagnostic information through means of a Fault Code Display that appears on the Battery Gauge. When a fault is detected, selected segments of the Battery Gauge will light to indicate the faults.
Disconnect battery charger. Throttle fault. Engager levers must be in neutral centered position before vehicle is turned on. Switch vehicle off, center levers, and switch back on.
If, within such warranty period, any such product shall be proven to Electric Mobility Corp. Print page 1 Print document 59 pages. Rename the bookmark.
0コメント